Well Clean Up and Completion

The ARdVAC™ Venturi XTRactR™ Tool is a robust, Venturi type debris extraction tool which vacuums debris and junk from the wellbore. It can be deployed in most common casing or hole sizes and can be adapted to clean inside packer bores. It can be run individually or modularly as part of the ArmRdillo™ Wellbore Clean-Up […]

The MAGVac Fishing Magnet is a robust magnetic junk retrieval tool with reverse circulating technology that sucks junk into a magnetic overshot for safe retrieval to surface. Features Powerful rare earth magnetic arrangement Available in various OD sizes Integral venturi sucks debris into the magnet overshot Benefits Cost savings Novel magnetic overshot increases the changes […]

The RizeRdillo™ Riser Cleaning Tool combines brushing, wiping and debris extraction technology on a robust mandrel to effectively clean subsea drilling risers. Features Rows of overlapping brushes to scour the riser wall to remove debris Heavy duty elastomeric wiper rings to wipe mud cake Large fluid bypass area to circulate debris to surface High capacity […]

The MAGStar™ Jetting Tool is a BOP jetting tool with the combined functionality of a downhole magnet. The MAGStar™ Jetting Tool is designed to jet the BOP cavities to dislodge and capture ferrous metal debris during wellbore clean-up operations of the BOP. Features Available in multiple sizes to suit onshore, platform or sub-sea BOP stacks […]

The Short Time Jetting Tool is a simple and robust wellbore clean-up tool and can be run individually or modularly as part of the OWS ArmRdillo™ Wellbore Clean-Up System. The Short Time Jetting Tool is designed to jet the BOP cavities to dislodge debris during wellbore clean-up operations. Features Single piece Mandrel Available with slick […]

The RizeRdillo™ Advanced Jetting Tool combines jetting action with flow-rate boost effect to maximize riser cleaning efficiency. Features Jetting Sleeve with offset Jetting Nozzles arranged to jet the riser wall and also to penetrate into the BOP cavities to jet and clean Upward angled Jetting Nozzles arranged on the body help to reintroduce jetted debris […]

The PiRanha™ Junk XTractR™ is a robust wellbore clean-up tool and can be run individually or modularly as part of the ArmRdillo™ Wellbore Clean-Up System. The PiRanha™ Junk XTractR™ is designed to mill up and remove junk from the wellbore which could damage downhole equipment. Features Robust Single Piece Mandrel Fluted free-rotating Centralizer Rings provide […]

The XTractR™ BOP Junk Catcher is a robust, wellbore clean-up tool and can be run individually or modularly as part of the ArmRdillo™ Wellbore Clean-Up System. The XTractR™ BOP Junk Catcher can be adapted to most common casing sizes and any drill pipe combination.   Features Robust Mandrel with optional Integral Pup Join Quick Drain […]

The MAGStar4™ HD Casing Magnet is a robust, high strength, super capacity casing magnet with a free-rotating centralizer. It can be run individually or modularly as part of the OWS ArmRdillo™ Wellbore Clean-Up System. The MAGStar4™ HD Casing Magnet can be adapted to suit any casing size and drill pipe combination. Features 3 longitudinal ribs […]

The Liner Landing Sub is a simple but effective means of landing out in a Liner Top PBR or other profile in the wellbore to activate any type of weight set tool. Features Single piece mandrel Large bypass slots to maximize fluid bypass Tapered non-damaging lead shoulder Applications Run as part of a wellbore cleaning […]

The VeRidrift™ Casing Drift is a robust, 360° free rotating contact, wellbore clean-up tool and can be run individually or modularly as part of the OWS ArmRdillo™ Wellbore Clean-Up System. The VeRidrift™ Casing Drift can be adapted to suit any casing size and drill pipe combination. Features Fluted Centralizer Drift provides centralization, bypass while drifting […]

A part of the RaptR™ Liner Cleanup System the RaptR™ Relockable Safety Swivel is a downhole safety device which prevents twist-off of the drill pipe due to over-torque which can be relocked when desired. Features External shear pins can easily be removed or added on site to achieve the desired over-torque shear rating Upper Bearing […]

The DTectR™ Inflow Test Packer is a simple but effective well integrity testing device which performs a negative pressure test on a liner top. The design of the tool allows the test to be performed during wellbore cleaning operations, eliminating the need for a separate trip in hole. Features Generous internal bypass allows prevents damage […]

The DrillRdillo Drilling Scraper is a 360° contact robust scraper tool with retracted scraper blades which can be activated when desired through ball drop. It is designed to be run in a drilling string in a switched-off mode while drilling open holes section. When wanted the blades are activated to allow scraping of the casing. […]

The Packer Circulating Tool is run with open circulation ports to allow circulation above a packer and to auto-fill the string whilst RIH. When desired the ports can be closed to allow setting of the packer. Features Single piece body with no internal connections Drop ball activated to close the ports Shear rating can be […]

The Rupture Disc Sub is a tool activated by applying pressure from surface to burst a rupture disc to allow communication between the workstring and the annulus at a predetermined pressure. The tool has two calibrated rupture discs to provide redundancy. Features Single piece body with no internal connections Large bore, nearly slick, inner diameter […]

The LCT– Liner Top Circulating Tool is a robust and simple circulating tool which can be opened and closed by string manipulation. It is landed onto a Liner Top or similar restriction to allow circulation of the casing above. The LCT– Liner Top Circulating Tool is available to suite common casing and liner combinations. Features […]

The WCT- Weight Set Circulating Tool is a robust and simple circulating tool which can be opened and closed by string manipulation. It is typically run above a Liner Top to allow circulation of the casing above the liner. The WCT- Weight Set Circulating Tool is available to suit common casing and liner combinations. Features […]

The MillRdillo Deburring Tool™ is a robust milling tool designed to safely mill hard inclusions in the casing inner diameter without causing damage. It can be run individually or modularly as part of the ArmRdillo Wellbore Clean-Up System. Features 3 spring loaded milling blades dressed with tungsten carbide inserts The milling elements are fully disengaged […]

MunchRdillo™ Scraper Milling Tool is a robust 360° contact free-rotating wellbore clean-up tool that combines the function of a scraping element and a heavy duty mill on one tool mandrel, which can be run modularly as part of the ArmRdillo™ Wellbore Clean-Up System. The MunchRdillo™ can be adapted to suit any casing size and drill […]

The ScourRdillo™ Casing Brush is a robust, 360° free rotating contact, wellbore clean-up tool and can be run individually or modularly as part of the ArmRdillo™ Wellbore Clean-Up System. The ScourRdillo™ Casing Brush can be adapted to suit any casing size and drill pipe combination. Features Multiple overlapping wire brush elements which provides 360° contact […]

The RazRdillo™ Casing Scraper is a robust, 360° free rotating contact, wellbore clean-up tool and can be run individually or modularly as part of the ArmRdillo ™ Wellbore Clean-Up System. The RazRdillo™ Casing Scraper can be adapted to suit any casing size and drill pipe combination. Features Strong, self-sprung, single piece Scraper Broach machined from […]